Cat 3 Vibration Analysis Certification Training / HOUSTON, TX
October 9 - October 13$2,695.00
The category 3 vibration course meets and exceeds requirements of ISO 18436-2. It is intended for students who have passed Cat 2 and wish to delve deeper into vibration analysis or manage Condition Monitoring programs.
Personnel classified to category 3 require all the knowledge, experience and skills expected of personnel classified to categories 1 and 2, and in addition shall at least:
- be able to design, direct and establish routine condition monitoring programs and non-routine investigations for the purpose of fault diagnosis;
- be able to specify the appropriate vibration instrumentation hardware, software, and processing for portable monitoring systems, permanently installed surveillance systems, and equipment protection systems
- have an in-depth knowledge of the principles and techniques of machinery VA and be able to make initial diagnoses of suspected faults beyond the range of commonly encountered issues. This should include, but not be limited to, the use of frequency spectra, time waveforms and orbits, transfer functions, basic operating deflection shapes, and acceleration enveloping under both steady state and transient conditions with or without a phase trigger;
- be able to manage such condition-monitoring programs, evaluate the alarm sets, write working
procedures and specify vibration acceptance testing procedures;
- be able to initiate and validate machinery corrective actions including in situ two-plane rigid rotor
- be able to recommend restrictions to machine operation;
- be able to understand and direct, when necessary, alternative condition monitoring technologies to verify or investigate issues raised through routine data collection;
- be able to provide technical guidance to and instruct category 1 and 2 personnel, and, subject to agreement with the employer or client, deem them competent to carry out certain duties which would normally be outside the scope of those competencies.
It is the responsibility of the employer or client to ensure that category 2 personnel have the necessary competency in the required management skills, e.g. creating budgets, preparing cost justifications, and managing personnel development.
Detailed Topics List
|Meets or exceeds ISO 18436-2
Running a Monitoring Program
Condition Monitoring Technologies
Natural Frequencies and Resonance
Dealing with Resonance
Standards, Alarms and Reporting
Meet your Instructor—The Guru of Vibration Analysis
Alan Friedman, Founder and CEO of Zenco—Vibration Experts, is an ISO-18436-2 Category IV Certified Vibration Analyst, CRL and CRMP with over 30+ years of experience in machinery condition monitoring.
Alan is the author of Audit It! Improve it: Getting The Most From Your Vibration Analysis Program which looks at condition monitoring from a program management perspective. The book takes you step by step through an easy to understand process of auditing and improving your vibration monitoring program to make sure it not only gives you the financial benefits you deserve but also to ensure it is in compliance with ISO standards and industry best practices. Chock full of tips and tricks and easy to understand worksheets to get you started, this book is a must read for anyone involved in maintenance or condition monitoring. Buy it on Amazon.com